Light Kit for LEGO® Icons Ghostbusters™ ECTO-1 #10274

LED Light Kit for #10274

79,99 €

In stock

Version Classic Remote + Music

Description

Every kit is built around three things we won't compromise on.

Housing that disappears into the build. Our LED casings and modules clip onto standard studs like any other piece — no adhesive, no brackets, nothing that reads as an add-on once the set is back together.

Wiring you route once and forget. Flat ribbon wire, thin enough to sit under a plate or turn a corner without lifting a brick. Connectors are non-polarised, so there's no wrong way round and no squinting at tiny arrows mid-install.

Light tuned to the set, not to a catalogue. Each kit gets its own brightness balance and effects — flicker for a forge, a slow fade for a cockpit — decided set by set rather than applied from a default.

Delivery & Returns

Fast dispatch. Orders placed before 12 PM (CEST / GMT+2) are dispatched the same day*. All other orders are dispatched the next business day.

Tiered shipping rates. Costs are calculated based on your order value. See our shipping page for full details.

Simple returns. Need to make a return? Visit our returns request page to begin.

*Same-day dispatch is not guaranteed during high-volume sale events.

Shipping & returns policy

Warranty & Disclaimers

Product disclaimer. This listing is for a Bright My Bricks™ LED lighting kit. The LEGO® set shown in our photos and videos is sold separately and is not included. Bright My Bricks is an independent brand with no affiliation to, sponsorship from, or endorsement by the LEGO Group. LEGO® is a trademark of the LEGO Group.

Safety notice. Contains small parts and batteries. Not for children under 3, in line with EN 71-1. Adult supervision required for younger builders during installation and use.

Installation guidelines. Present the connector square to the port and push gently until it seats. If it resists, back off and realign rather than forcing it — forcing a misaligned connector is the one thing that can bend a pin. Handle modules by the housing rather than the wire.

2-year warranty coverage. Every kit is covered for two years, in line with EU consumer law. If a component arrives faulty or fails in normal use, use our Faulty Component Request page and we'll send a replacement.

Contact support

Instructions

Digital manuals and video instructions for this light kit are available on our instructions page.

The guide walks through each component and its function, and shares the practices that get the most out of your build.

If any part is missing or damaged, contact us — we're here to help.

Assembly instructions

Light Kit for LEGO® Icons Ghostbusters™ ECTO-1 #10274 — standard build, without the LED light kit — From Display Piece To CenterpieceDrag the slider to see what your set looks like before and after our LED kit.

Light Kit for LEGO® Icons Ghostbusters™ ECTO-1 #10274 — lit with the LED light kit — From Display Piece To CenterpieceDrag the slider to see what your set looks like before and after our LED kit.

Features

Light Kit for LEGO® Icons Ghostbusters™ ECTO-1 #10274: Ready to Believe You

Who ya gonna call? As a builder who grew up with this film, the ECTO-1 is more than just a car; it's a piece of cinematic history, a hero in its own right. This upgraded Bright My Bricks light kit is our definitive tribute to the ghost-hunting Cadillac. We've packed it with more effects and details than ever to capture its quirky, high-tech, and slightly chaotic personality. If you're looking for the highest quality, you can see a comparison of the best LEGO light kits on the market on our blog.

Authentic Flashing Light Bars
The roof-mounted light bars flash with a brilliant, screen-accurate blue sequence. We've timed the effect perfectly to replicate the look of the ECTO-1 as it screeches around the corners of New York City on its way to a bust.
Paranormal Roof Rack Equipment
The entire jumble of paranormal detection gear on the roof is brought to life. A sweeping green light for the ghost sniffer, plus various blinking red and white lights on the other gadgets, makes the whole rack look active and operational. The process was as complex as lighting up the detailed chaos of Apocalypseburg.
Remote-Controlled Gunner Seat
The pop-out gunner seat is a fantastic feature, and we've lit it up. The targeting console is illuminated with a cool white light, making it look ready for action the moment it swings out of the car.
Glowing Ghost Trap Drone
The RTV (Remote Trap Vehicle) that deploys from the rear is equipped with its own eerie, pulsating yellow light. This makes the ghost trap look armed and ready to ensnare any free-roaming phantasms.
Classic Cadillac Headlights & Taillights
Beneath all the ghost-busting gear, it's still a classic 1959 Cadillac Miller-Meteor. We've given it brilliant, period-accurate white headlights and iconic red fin taillights, honoring the beautiful vehicle at its core.
"We Got One!" Proton Pack Effect
Our upgraded kit includes an interior light that simulates the glow of a recently activated proton pack. It's a subtle but crucial detail for any fan, reminding us of the heroes inside, just as important as the car itself. When you're ready for another iconic ride, you can get your classic TV series Batmobile light kit.

Pick Your Version

Select the option that matches your display preferences and lighting needs.

Set it once. Leave it glowing.

For the build that's found its shelf and isn't moving again.

Battery Box – compact 3×AAA unit (batteries not included)
Full LED set, tuned to this model
Custom effects, pre-programmed for this build
Precision spotlights on the details worth staring at
PDF manual and video guide

Flick it on when you walk in. That's the whole ritual.

How do you turn LEGO® Ghostbusters ECTO-1 #10274 into a lit display piece?

A set-specific LED light kit for LEGO® Ghostbusters ECTO-1 #10274 turns the completed build into a night display by giving the eye a clear route through the model. A few deliberate focal points usually work better than lighting every brick.

This light kit does more than just add lights; it answers the call. The flashing emergency lights, the hum of the paranormal equipment, and the glow of the ghost trap all combine to tell the story of four unlikely heroes saving the world. It’s a tribute to the sights and sounds of a movie that defined a generation.

Don't let your ECTO-1 sit in the firehouse gathering dust. Give it the emergency, ghost-busting lighting it deserves and get it ready for the next paranormal event. When the job is done, be sure to shop for more LEGO Icons light kits online and bring all your favorite movie vehicles to life.

For neighbouring builds, browse the LEGO Icons Light Kits.

About

Bright My Bricks

Transform your finished build into a true display piece with a Bright My Bricks LED light kit. Designed specifically for this LEGO set, our kit delivers precise, warm illumination that highlights every detail. Note: you are purchasing the lighting kit only; the LEGO set itself is sold separately

Instructions

Every kit ships with a printed quick-start card, a full PDF manual and a step-by-step video. Here is the shape of the job before you open the bag.

Step 1: Unpack and check
Build the LEGO® set first — lighting a half-finished model means taking it apart again. Lay every component out against the parts list before you start: a missing piece found now costs five minutes, found mid-install it costs the session.
Step 2: Position your LED lights
Each LED goes in a spot the guide names. Thread the wire between bricks as you go rather than at the end — routing is the one step worth taking slowly, and it is what separates a kit you notice from one you do not.
Step 3: Wire your power system
Seat each cable in its module. Present the connector square and push gently; if it resists, back off and realign rather than forcing it. A forced connector is the one thing that bends a pin.
Step 4: Power up and check
Test everything before you close it up. Confirm each LED lights, then hide any wire that shows. A dead connection found now is trivial; found once the set is sealed, it is not.
Step 5: Perfect your display
Tuck the last of the wire out of sight and put the set where it belongs. Installed as directed, the build looks untouched — until you switch it on.

The last step isn't in this guide. It's the evening you finish, turn the room lights off, and watch something you spent weeks on hold its own glow. That is the moment the kit was built for.

Customer Reviews

FAQs

Do I need any special skills or tools?

No. If you can build the set, you can light it. Everything is plug-and-play — no soldering, no wiring knowledge, no tools beyond your hands. The manual walks each step with photos.

Do I have to take my set apart?

Rarely more than partially. You'll lift a few plates and open a few sections to route wire and seat LEDs. The guide tells you exactly which ones, zone by zone, so you're never guessing.

How is the kit powered?

Two options, both included in the design: a battery module (3×AAA, batteries not supplied) for sets you move around, or USB into any power bank, wall adapter or computer for a display that stays lit.

Will the wires show?

Not once installed as directed. The wire is flat ribbon, thin enough to run under a plate or between studs without breaking clutch. Routing is the one part of installation worth taking slowly — done properly, the set looks untouched.

Is it safe for my bricks?

Yes. The whole system runs at 5V with micro-LEDs that don't heat up, so there's nothing to warp, melt or discolour. Components are tested against international safety standards, and nothing in the kit modifies or marks a brick — the installation is fully reversible.

What if a part is missing or faulty?

Use our Faulty Component Request page and we'll send a replacement. Two-year cover, in line with EU consumer law.