Light Kit for LEGO® Titanic #10294

LED light kit for #10294

129,99 €

In stock

Version Classic Remote

Description

Every kit is built around three things we won't compromise on.

Housing that disappears into the build. Our LED casings and modules clip onto standard studs like any other piece — no adhesive, no brackets, nothing that reads as an add-on once the set is back together.

Wiring you route once and forget. Flat ribbon wire, thin enough to sit under a plate or turn a corner without lifting a brick. Connectors are non-polarised, so there's no wrong way round and no squinting at tiny arrows mid-install.

Light tuned to the set, not to a catalogue. Each kit gets its own brightness balance and effects — flicker for a forge, a slow fade for a cockpit — decided set by set rather than applied from a default.

Delivery & Returns

Fast dispatch. Orders placed before 12 PM (CEST / GMT+2) are dispatched the same day*. All other orders are dispatched the next business day.

Tiered shipping rates. Costs are calculated based on your order value. See our shipping page for full details.

Simple returns. Need to make a return? Visit our returns request page to begin.

*Same-day dispatch is not guaranteed during high-volume sale events.

Shipping & returns policy

Warranty & Disclaimers

Product disclaimer. This listing is for a Bright My Bricks™ LED lighting kit. The LEGO® set shown in our photos and videos is sold separately and is not included. Bright My Bricks is an independent brand with no affiliation to, sponsorship from, or endorsement by the LEGO Group. LEGO® is a trademark of the LEGO Group.

Safety notice. Contains small parts and batteries. Not for children under 3, in line with EN 71-1. Adult supervision required for younger builders during installation and use.

Installation guidelines. Present the connector square to the port and push gently until it seats. If it resists, back off and realign rather than forcing it — forcing a misaligned connector is the one thing that can bend a pin. Handle modules by the housing rather than the wire.

2-year warranty coverage. Every kit is covered for two years, in line with EU consumer law. If a component arrives faulty or fails in normal use, use our Faulty Component Request page and we'll send a replacement.

Contact support

Instructions

Digital manuals and video instructions for this light kit are available on our instructions page.

The guide walks through each component and its function, and shares the practices that get the most out of your build.

If any part is missing or damaged, contact us — we're here to help.

Assembly instructions

Light Kit for LEGO® Titanic #10294 — standard build, without the LED light kit — From Display Piece To CenterpieceDrag the slider to see what your set looks like before and after our LED kit.

Light Kit for LEGO® Titanic #10294 — lit with the LED light kit — From Display Piece To CenterpieceDrag the slider to see what your set looks like before and after our LED kit.

Features

Light Kit for LEGO® Icons Titanic #10294: A Liner Seen at Night

At 1.35 metres this is a ship you walk along rather than look at. Its length is the whole point, and length is exactly what darkness takes away first. The kit answers that with rows: hundreds of portholes down the hull, deck lines running bow to stern, and a warm centre where the staircase sits. Lit, the model reads as a liner at sea rather than a long grey shape on a sideboard.

The Grand Staircase
Warm white falls through the staircase well, brightest at the top and fading downward. It is the one interior everybody recognises, and giving it a gradient rather than a flat glow is what suggests a space with several floors instead of a lit box.
Rows of Portholes
Hundreds of small warm points run the length of the hull at deck level. Individually they are nothing; in a row they draw the waterline and give the ship its true length, which is the single most convincing effect on a model this size.
The Promenade Decks
Soft light runs along the open promenades on both sides. These are the only walkable spaces visible from outside, and lighting them adds a second horizontal line above the portholes, which is what stops the hull from reading as one solid slab.
The Engine Rooms
Deep in the cutaway, a pulsing orange glow marks the boilers. It is the only unsteady light on the ship and the only warm colour that is not electric, which is historically right: those rooms were lit by fire, not by lamps.
The Four Funnels
Uplights lift the funnels against whatever is behind the model. They are the tallest elements and the ship's signature from a distance, and lighting them from below keeps their taper visible instead of flattening them into cylinders.
The Ship's Bridge
Cool white marks the bridge, deliberately the only cold light above deck. It separates the command area from the warm passenger spaces below, exactly the way photographs of working liners at night show the contrast.

Pick Your Version

Select the option that matches your display preferences and lighting needs.

Set it once. Leave it glowing.

For the build that's found its shelf and isn't moving again.

Battery Box – compact 3×AAA unit (batteries not included)
Full LED set, tuned to this model
Custom effects, pre-programmed for this build
Precision spotlights on the details worth staring at
PDF manual and video guide

Flick it on when you walk in. That's the whole ritual.

Can you add lights to LEGO® Titanic #10294 after building it?

A set-specific LED light kit for LEGO® Titanic #10294 can be added after the model is complete. The fitting sequence follows the finished build in manageable sections, so the goal is careful access rather than a second full build.

The Titanic is the longest set LEGO has produced, and its problems are the problems of scale rather than of detail. Seen from three metres away, no single window matters; what registers is the line of the hull, the spacing of the decks and the four funnels above them. That is why this kit puts most of its LEDs into rows rather than into features, and why the interior lighting is kept warm and low. It also breaks into three sections for display, so the wiring is arranged to let the ship be separated and rejoined without unthreading anything. Fitting is long but repetitive, best done alongside the build. The Icons range covers the other large display models.

About

Bright My Bricks

Transform your finished build into a true display piece with a Bright My Bricks LED light kit. Designed specifically for this LEGO set, our kit delivers precise, warm illumination that highlights every detail. Note: you are purchasing the lighting kit only; the LEGO set itself is sold separately

Instructions

Every kit ships with a printed quick-start card, a full PDF manual and a step-by-step video. Here is the shape of the job before you open the bag.

Step 1: Unpack and check
Build the LEGO® set first — lighting a half-finished model means taking it apart again. Lay every component out against the parts list before you start: a missing piece found now costs five minutes, found mid-install it costs the session.
Step 2: Position your LED lights
Each LED goes in a spot the guide names. Thread the wire between bricks as you go rather than at the end — routing is the one step worth taking slowly, and it is what separates a kit you notice from one you do not.
Step 3: Wire your power system
Seat each cable in its module. Present the connector square and push gently; if it resists, back off and realign rather than forcing it. A forced connector is the one thing that bends a pin.
Step 4: Power up and check
Test everything before you close it up. Confirm each LED lights, then hide any wire that shows. A dead connection found now is trivial; found once the set is sealed, it is not.
Step 5: Perfect your display
Tuck the last of the wire out of sight and put the set where it belongs. Installed as directed, the build looks untouched — until you switch it on.

The last step isn't in this guide. It's the evening you finish, turn the room lights off, and watch something you spent weeks on hold its own glow. That is the moment the kit was built for.

Customer Reviews

FAQs

Do I need any special skills or tools?

No. If you can build the set, you can light it. Everything is plug-and-play — no soldering, no wiring knowledge, no tools beyond your hands. The manual walks each step with photos.

Do I have to take my set apart?

Rarely more than partially. You'll lift a few plates and open a few sections to route wire and seat LEDs. The guide tells you exactly which ones, zone by zone, so you're never guessing.

How is the kit powered?

Two options, both included in the design: a battery module (3×AAA, batteries not supplied) for sets you move around, or USB into any power bank, wall adapter or computer for a display that stays lit.

Will the wires show?

Not once installed as directed. The wire is flat ribbon, thin enough to run under a plate or between studs without breaking clutch. Routing is the one part of installation worth taking slowly — done properly, the set looks untouched.

Is it safe for my bricks?

Yes. The whole system runs at 5V with micro-LEDs that don't heat up, so there's nothing to warp, melt or discolour. Components are tested against international safety standards, and nothing in the kit modifies or marks a brick — the installation is fully reversible.

What if a part is missing or faulty?

Use our Faulty Component Request page and we'll send a replacement. Two-year cover, in line with EU consumer law.