light kit for LEGO® Halloween Pumpkin Lantern #40872, illuminated at night
LED kit powered on: Bright My Bricks LED lighting kit for LEGO® Halloween Pumpkin Lantern #40872
LED lights for LEGO® Halloween Pumpkin Lantern #40872, close-up of the LED lighting detail
LEGO® Halloween Pumpkin Lantern #40872 lighting effect on the build, with the premium LED light kit
Bright My Bricks LED light kit for LEGO® Halloween Pumpkin Lantern #40872 — installed and glowing
LEGO® Halloween Pumpkin Lantern #40872 display lighting in a dark room, with the premium LED light kit
light kit for LEGO® Halloween Pumpkin Lantern #40872, showcase lighting view
warm LED glow detail: Bright My Bricks LED lighting kit for LEGO® Halloween Pumpkin Lantern #40872
Bright My Bricks LED light kit for LEGO® Halloween Pumpkin Lantern #40872 — fully illuminated on display

Light Kit for LEGO® Halloween Pumpkin Lantern #40872

LED Light Kit for #40872

€24,99
Quantity

Description

Every kit is built around three things we won't compromise on.
 

Housing that disappears into the build. Our LED casings and modules clip onto standard studs like any other piece — no adhesive, no brackets, nothing that reads as an add-on once the set is back together.
 

Wiring you route once and forget. Flat ribbon wire, thin enough to sit under a plate or turn a corner without lifting a brick. Connectors are non-polarised, so there's no wrong way round and no squinting at tiny arrows mid-install.
 

Light tuned to the set, not to a catalogue. Each kit gets its own brightness balance and effects — flicker for a forge, a slow fade for a cockpit — decided set by set rather than applied from a default.

Delivery & Returns 

Delivery

 

After confirming your order, rest assured we're on top of it! Typically, we dispatch orders within 1-3 business days (most of the time, it's just 1 business day). However, during peak periods like Black Friday and Christmas, dispatching might extend up to 5 business days. The good news? We provide free shipping globally! Deliveries reach most countries within 3-9 days.

 

Returns

 

If something isn't right with your order, we're here to help. You can return new, unopened, or damaged items within 30 days of delivery, and we'll provide a full refund.

Delivery & Returns

  • Fast Dispatch: Orders placed before 12 PM (CEST / GMT+2) are dispatched the same day*. All other orders are dispatched the next business day.
  • Tiered Shipping Rates: Costs are calculated based on your order value. See our shipping page for full details.
  • Simple Returns: Need to make a return? Please visit our returns request page to begin.

*Same-day dispatch is not guaranteed during high-volume sale events.

Warrantly & Disclaimers

Product Disclaimer
This listing is for a Bright My Bricks™ LED lighting kit. The LEGO® set shown in our photos and videos is sold separately and is not included. Bright My Bricks is an independent brand with no affiliation to, sponsorship from, or endorsement by the LEGO Group. LEGO® is a trademark of the LEGO Group.

 

Safety Notice
Contains small parts and batteries. Not for children under 3, in line with EN 71-1. Adult supervision required for younger builders during installation and use.

 

Installation Guidelines
Present the connector square to the port and push gently until it seats. If it resists, back off and realign rather than forcing it — forcing a misaligned connector is the one thing that can bend a pin. Handle modules by the housing rather than the wire.

 

2-Year Warranty Coverage
Every kit is covered for two years, in line with EU consumer law. If a component arrives faulty or fails in normal use, use our Faulty Component Request page and we'll send a replacement.

 

Need Support?
Installation questions, troubleshooting, warranty claims — our support page is the fastest route to a human.

Warranty

 

We stand by the quality of our light kits! All our products come with a 2-year warranty that covers free support and shipping. If you ever need assistance or replacements after these initial 2 years, we've still got your back. Though we'll provide the components for free, there'll be a small shipping fee of 6 USD.

 

Disclaimer

 

We sell only lights designed specifically for LEGO® sets. Please be aware that LEGO® is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse this site.

Instructions

You can access our digital manuals and video instructions for this light kit here: Bright My Bricks Instructions

 

This guide provides a clear presentation of each component and its function. In it, we share our best practices to help you make the most of your configuration and attain outstanding performance.

 

If you have any questions or experience issues with missing or damaged parts, contact us—we’re here to help!

Inside This Kit

Light Kit for LEGO® Halloween Pumpkin Lantern #40872

No glue, no cut bricks, nothing modified — the LEDs clip inside the pumpkin you already built, the wiring stays hidden in the shell, and the whole kit runs off one USB port. Built for set #40872 specifically: a candle-orange glow that pours out through the carved eyes and mouth, and a cold green backlight on the ghost. Pair it with our newest LEGO light kits.
Light Kit for LEGO® Halloween Pumpkin Lantern #40872

Light Through the Carved Face

Warm orange LEDs sit inside the shell so the light escapes through the cut-out eyes, nose and grin exactly the way it does through a real carved pumpkin. Unlit, those openings are just gaps in orange plastic — lit, they are the whole point of the build.

Light Kit for LEGO® Halloween Pumpkin Lantern #40872

Glow Under the Lid

Light leaks up between the stem cap and the body, tracing the seam the way a real jack-o'-lantern does with a candle inside. It is the small detail that makes the model read as lit from within rather than lit from outside. Browse more in our newest LEGO light kits.

Light Kit for LEGO® Halloween Pumpkin Lantern #40872

Cold Green Ghost

The ghost figure gets its own green LED, deliberately cold against the pumpkin's warm orange. Two colour temperatures on one small display is what stops it looking like a single lamp behind a model.
Light Kit for LEGO® Halloween Pumpkin Lantern #40872

Small Set, Real Presence

This is a compact build, and that works in its favour: at arm's length on a desk or a mantelpiece the glow carries far more than the footprint suggests. A lit pumpkin owns a dark room in a way a 40-piece model has no right to. Discover more in our best-selling LEGO light kits.

Light Kit for LEGO® Halloween Pumpkin Lantern #40872

Six Weeks a Year, Then a Shelf Piece

Because the kit is USB-powered and comes out without a trace, the pumpkin can be lit through October and stored lit-ready for next year, or left unlit on a shelf the rest of the time. Nothing about the kit forces a permanent decision.

Light Kit for LEGO® Halloween Pumpkin Lantern #40872

What's in the Box, and How It Goes In

Light strings, light boards, connecting cables, a 50 cm USB cable and a numbered guide — pre-wired for set #40872, nothing generic, nothing to cut. The manual is online at lightingmanuals.com (enter the set number or the code on the box), so it is never capped by print length, and the numbered steps let you stop and come back. On a build this size the install is at the short end of the range, around half an hour. If your lantern is already assembled, expect to lift a few sections to tuck the wires inside the shell — the guide shows exactly which. Power is 5V USB from any phone charger or power bank, no battery box, and the LEDs stay cool to the touch. Nothing is glued or forced, and the whole kit comes out later without a trace. Read what collectors say about our kits.

Pick Your Version

Select the option that matches your display preferences and lighting needs.

  • Classic

  • Remote

Set it once. Leave it glowing.
For the build that's found its shelf and isn't moving again.

✓ Battery Box – compact 3×AAA unit (batteries not included)

✓ Full LED set, tuned to this model

✓ Custom effects, pre-programmed for this build

✓ Precision spotlights on the details worth staring at

✓ PDF manual and video guide

Flick it on when you walk in. That's the whole ritual.

Change the mood without moving.
For the build that shares a room you actually live in.

✓ Everything in the Classic version

✓ Wireless remote — works up to 5 m / 16 ft

✓Switch between effects instantly

✓ Dim it for evenings, full brightness when someone's over

✓ On/off without reaching behind the shelf

One build, a different scene every night.

FROM THE

Readers' Section

"A jack-o'-lantern that never rots, and never needs a match."

Carving a pumpkin is a one-week investment that ends in the compost. The LEGO version keeps the grin and loses the mould, and with a warm LED inside it does the only job a jack-o'-lantern was ever built for: throwing light through a carved face in a dark room. Set it out in October, pack it away in November, bring it back every year. Find more at our newest LEGO light kits and best-selling LEGO light kits.

ABOUT

BRIGHT BRICKS

Bright My Bricks is committed to delivering top-quality LEGO 

lighting for your custom builds. Premium LED kits are our specialty. 

Please note: This is a light kit only. LEGO model not included.

AFTER THE LAST BRICK

THE MOMENT YOU BUILT IT ALL FOR

Installation, Step by Step

Installation Guide: Bring Your LEGO® to Life

Step 1: Unpack and check

Ensure your LEGO® set is fully assembled before starting. Open your Bright My Bricks kit and lay out all components to confirm everything is included. Our team has organized each element for effortless installation.

 

Digital Instructions Available – Download the complete guide for your specific kit. Choose between our PDF manual or step-by-step video tutorial.

Step 2: Position Your LED Lights

Place each LED in its designated location following the guide. Thread wires carefully between bricks—taking your time here ensures invisible routing and a professional result.

 

🎥 Expert Video Tutorial – Watch our detailed demonstration showing optimal placement techniques for flawless integration.

Step 3: Wire Your Power System

Connect cables to power modules as illustrated in your guide. Ensure connections click securely without forcing—this protects delicate pins. Route wires neatly to eliminate clutter and prevent strain on connection points.

Step 4: Power Up & Quality Check

Before securing everything, connect your power source and test the complete system. Verify each LED illuminates correctly and adjust any wire positioning for the cleanest possible finish.

 

Issues? No Problem – Our troubleshooting video covers solutions to common installation challenges.

Step 5: Perfect Your Display

Secure any exposed wiring for an invisible, seamless look. Position your newly illuminated LEGO® creation in its display location and admire the dramatic transformation you've achieved!

 

✨ Share Your Creation – Tag us @brightmybricks to showcase your masterpiece!

FAQs

Got questions? We’ve got answer...Light Up Your World!

Do I need any special skills or tools?

No. If you can build the set, you can light it. Everything is plug-and-play — no soldering, no wiring knowledge, no tools beyond your hands. The manual walks each step with photos.

Do I have to take my set apart?

Rarely more than partially. You'll lift a few plates and open a few sections to route wire and seat LEDs. The guide tells you exactly which ones, zone by zone, so you're never guessing.

How is the kit powered?

Two options, both included in the design: a battery module (3×AAA, batteries not supplied) for sets you move around, or USB into any power bank, wall adapter or computer for a display that stays lit.

Will the wires show?

Not once installed as directed. The wire is flat ribbon, thin enough to run under a plate or between studs without breaking clutch. Routing is the one part of installation worth taking slowly — done properly, the set looks untouched.

Is it safe for my bricks?

Yes. The whole system runs at 5V with micro-LEDs that don't heat up, so there's nothing to warp, melt or discolour. Components are tested against international safety standards, and nothing in the kit modifies or marks a brick — the installation is fully reversible.

What if a part is missing or faulty?

Use our Faulty Component Request page and we'll send a replacement. Two-year cover, in line with EU consumer law.
light kit for LEGO® Halloween Pumpkin Lantern #40872, illuminated at night
LED kit powered on: Bright My Bricks LED lighting kit for LEGO® Halloween Pumpkin Lantern #40872
LED lights for LEGO® Halloween Pumpkin Lantern #40872, close-up of the LED lighting detail
LEGO® Halloween Pumpkin Lantern #40872 lighting effect on the build, with the premium LED light kit
Bright My Bricks LED light kit for LEGO® Halloween Pumpkin Lantern #40872 — installed and glowing
LEGO® Halloween Pumpkin Lantern #40872 display lighting in a dark room, with the premium LED light kit
light kit for LEGO® Halloween Pumpkin Lantern #40872, showcase lighting view
warm LED glow detail: Bright My Bricks LED lighting kit for LEGO® Halloween Pumpkin Lantern #40872
Bright My Bricks LED light kit for LEGO® Halloween Pumpkin Lantern #40872 — fully illuminated on display
LED kit powered on: Bright My Bricks LED lighting kit for LEGO® Halloween Pumpkin Lantern #40872
LED lights for LEGO® Halloween Pumpkin Lantern #40872, close-up of the LED lighting detail
LEGO® Halloween Pumpkin Lantern #40872 lighting effect on the build, with the premium LED light kit
Bright My Bricks LED light kit for LEGO® Halloween Pumpkin Lantern #40872 — installed and glowing
LEGO® Halloween Pumpkin Lantern #40872 display lighting in a dark room, with the premium LED light kit
light kit for LEGO® Halloween Pumpkin Lantern #40872, showcase lighting view
warm LED glow detail: Bright My Bricks LED lighting kit for LEGO® Halloween Pumpkin Lantern #40872
Bright My Bricks LED light kit for LEGO® Halloween Pumpkin Lantern #40872 — fully illuminated on display

Light Kit for LEGO® Halloween Pumpkin Lantern #40872

LED Light Kit for #40872

€24,99
Quantity

Description

Every kit is built around three things we won't compromise on.
 

Housing that disappears into the build. Our LED casings and modules clip onto standard studs like any other piece — no adhesive, no brackets, nothing that reads as an add-on once the set is back together.
 

Wiring you route once and forget. Flat ribbon wire, thin enough to sit under a plate or turn a corner without lifting a brick. Connectors are non-polarised, so there's no wrong way round and no squinting at tiny arrows mid-install.
 

Light tuned to the set, not to a catalogue. Each kit gets its own brightness balance and effects — flicker for a forge, a slow fade for a cockpit — decided set by set rather than applied from a default.

Delivery & Returns 

Delivery & Returns

  • Fast Dispatch: Orders placed before 12 PM (CEST / GMT+2) are dispatched the same day*. All other orders are dispatched the next business day.
  • Tiered Shipping Rates: Costs are calculated based on your order value. See our shipping page for full details.
  • Simple Returns: Need to make a return? Please visit our returns request page to begin.

*Same-day dispatch is not guaranteed during high-volume sale events.

Delivery & Returns

  • Fast Dispatch: Orders placed before 12 PM (CEST / GMT+2) are dispatched the same day*. All other orders are dispatched the next business day.
  • Tiered Shipping Rates: Costs are calculated based on your order value. See our shipping page for full details.
  • Simple Returns: Need to make a return? Please visit our returns request page to begin.

*Same-day dispatch is not guaranteed during high-volume sale events.

Warrantly & Disclaimers

Before you order 

  • Kit only: the order covers the Bright My Bricks™ lighting kit. The LEGO® model in the photographs shows the kit fitted and is bought separately. We are an independent manufacturer with no link to the LEGO Group.
  • Age rating: not a toy. Contains small parts and batteries, and is not for children under 36 months. Fitting is a job for an adult, and younger builders should be supervised throughout.
  • Connectors: let each plug find its socket before you press. If it resists, it is off square — withdraw it and try again rather than forcing it.
  • Two-year warranty: every kit is covered for two years under EU consumer law. If a part fails, open a request on our "Faulty Component Request" page and a replacement goes out.

Product Disclaimer
This listing is for a Bright My Bricks™ LED lighting kit. The LEGO® set shown in our photos and videos is sold separately and is not included. Bright My Bricks is an independent brand with no affiliation to, sponsorship from, or endorsement by the LEGO Group. LEGO® is a trademark of the LEGO Group.

 

Safety Notice
Contains small parts and batteries. Not for children under 3, in line with EN 71-1. Adult supervision required for younger builders during installation and use.

 

Installation Guidelines
Present the connector square to the port and push gently until it seats. If it resists, back off and realign rather than forcing it — forcing a misaligned connector is the one thing that can bend a pin. Handle modules by the housing rather than the wire.

 

2-Year Warranty Coverage
Every kit is covered for two years, in line with EU consumer law. If a component arrives faulty or fails in normal use, use our Faulty Component Request page and we'll send a replacement.

 

Need Support?
Installation questions, troubleshooting, warranty claims — our support page is the fastest route to a human.

Instructions

You can access our digital manuals and video instructions for this light kit here: Bright My Bricks Instructions

 

This guide provides a clear presentation of each component and its function. In it, we share our best practices to help you make the most of your configuration and attain outstanding performance.

 

If you have any questions or experience issues with missing or damaged parts, contact us—we’re here to help!

Inside This Kit

Light Kit for LEGO® Halloween Pumpkin Lantern #40872

No glue, no cut bricks, nothing modified — the LEDs clip inside the pumpkin you already built, the wiring stays hidden in the shell, and the whole kit runs off one USB port. Built for set #40872 specifically: a candle-orange glow that pours out through the carved eyes and mouth, and a cold green backlight on the ghost. Pair it with our newest LEGO light kits.

Pick Your Version

Select the option that matches your display preferences and lighting needs.

  • Classic

  • Remote

Set it once. Leave it glowing.
For the build that's found its shelf and isn't moving again.

✓ Battery Box – compact 3×AAA unit (batteries not included)

✓ Full LED set, tuned to this model

✓ Custom effects, pre-programmed for this build

✓ Precision spotlights on the details worth staring at

✓ PDF manual and video guide

Flick it on when you walk in. That's the whole ritual.

Change the mood without moving.
For the build that shares a room you actually live in.

✓ Everything in the Classic version

✓ Wireless remote — works up to 5 m / 16 ft

✓ Switch between effects instantly

✓ Dim it for evenings, full brightness when someone's over

✓ On/off without reaching behind the shelf

One build, a different scene every night.

FROM THE

Readers' Section

"A jack-o'-lantern that never rots, and never needs a match."

Carving a pumpkin is a one-week investment that ends in the compost. The LEGO version keeps the grin and loses the mould, and with a warm LED inside it does the only job a jack-o'-lantern was ever built for: throwing light through a carved face in a dark room. Set it out in October, pack it away in November, bring it back every year. Find more at our newest LEGO light kits and best-selling LEGO light kits.

ABOUT

BRIGHT BRICKS

Bright My Bricks is committed to delivering top-quality LEGO 

lighting for your custom builds. Premium LED kits are our specialty. 

 

Please note: This is a light kit only. LEGO model not included.

AFTER THE LAST BRICK

THE MOMENT YOU BUILT IT ALL FOR

Installation, Step by Step

Installation Guide: Bring Your LEGO® to Life

FAQs

Got questions? We’ve got answer...Light Up Your World!

Do I need any special skills or tools?

No. If you can build the set, you can light it. Everything is plug-and-play — no soldering, no wiring knowledge, no tools beyond your hands. The manual walks each step with photos.

Do I have to take my set apart?

Rarely more than partially. You'll lift a few plates and open a few sections to route wire and seat LEDs. The guide tells you exactly which ones, zone by zone, so you're never guessing.

How is the kit powered?

Two options, both included in the design: a battery module (3×AAA, batteries not supplied) for sets you move around, or USB into any power bank, wall adapter or computer for a display that stays lit.

Will the wires show?

Not once installed as directed. The wire is flat ribbon, thin enough to run under a plate or between studs without breaking clutch. Routing is the one part of installation worth taking slowly — done properly, the set looks untouched.

Is it safe for my bricks?

Yes. The whole system runs at 5V with micro-LEDs that don't heat up, so there's nothing to warp, melt or discolour. Components are tested against international safety standards, and nothing in the kit modifies or marks a brick — the installation is fully reversible.

What if a part is missing or faulty?

Use our Faulty Component Request page and we'll send a replacement. Two-year cover, in line with EU consumer law.

From Our Builders

Share your photos on Instagram and tag @brightmybricks in the caption for a chance to be featured on our website.

@brightmybricks

From Our Builders

Share your photos on Instagram and tag @brightmybricks in the caption for a chance to be featured on our website.

@brightmybricks

Complete Your Collection

View All
Thanks for contacting us. We'll get back to you as soon as possible.

Our LED Kits

New Releases

Best Sellers

Light Kits

Lighting Components

Acrylic Displays
Thanks for contacting us. We'll get back to you as soon as possible.

Help & Support

Contact Us

Track My Order

Assembly Instructions

About

About Us

Ambassador Program

Blog

Our Newsletter

Join the Bright My Bricks VIP

 

New kits, installation guides and subscriber-only offers. One email a week, no more.

Thanks for subscribing

By clicking Sign Up you're confirming that you agree with our Terms and Conditions.

© 2026 Bright My Bricks™ — All rights reserved. We make the lights, not the bricks — LEGO® sets pictured are sold separately. The LEGO® sets shown in our photos are sold separately and are not included. LEGO® is a trademark of the LEGO Group, which does not sponsor, authorize or endorse this site.

Privacy Policy

Terms & Conditions

Returns Policy

Shipping Policy

Our LED Kits

new releases

best sellers

light kits

lighting components

acrylic displays

Help & Support

contact us

track my order

instructions

About

about us

ambassador program

blog

© 2026 Bright My Bricks™ — All rights reserved. Bright My Bricks sells LED lighting kits only. The LEGO® sets shown in our photos are sold separately and are not included. LEGO® is a trademark of the LEGO Group, which does not sponsor, authorize or endorse this site.

© 2026 bright my bricks™ - all rights reserved.