Light Kit for LEGO® Star Wars R2-D2 #75379

LED light kit for #75379

34,99 €

In stock

Version Classic Remote

Description

Every kit is built around three things we won't compromise on.

Housing that disappears into the build. Our LED casings and modules clip onto standard studs like any other piece — no adhesive, no brackets, nothing that reads as an add-on once the set is back together.

Wiring you route once and forget. Flat ribbon wire, thin enough to sit under a plate or turn a corner without lifting a brick. Connectors are non-polarised, so there's no wrong way round and no squinting at tiny arrows mid-install.

Light tuned to the set, not to a catalogue. Each kit gets its own brightness balance and effects — flicker for a forge, a slow fade for a cockpit — decided set by set rather than applied from a default.

Delivery & Returns

Fast dispatch. Orders placed before 12 PM (CEST / GMT+2) are dispatched the same day*. All other orders are dispatched the next business day.

Tiered shipping rates. Costs are calculated based on your order value. See our shipping page for full details.

Simple returns. Need to make a return? Visit our returns request page to begin.

*Same-day dispatch is not guaranteed during high-volume sale events.

Shipping & returns policy

Warranty & Disclaimers

Product disclaimer. This listing is for a Bright My Bricks™ LED lighting kit. The LEGO® set shown in our photos and videos is sold separately and is not included. Bright My Bricks is an independent brand with no affiliation to, sponsorship from, or endorsement by the LEGO Group. LEGO® is a trademark of the LEGO Group.

Safety notice. Contains small parts and batteries. Not for children under 3, in line with EN 71-1. Adult supervision required for younger builders during installation and use.

Installation guidelines. Present the connector square to the port and push gently until it seats. If it resists, back off and realign rather than forcing it — forcing a misaligned connector is the one thing that can bend a pin. Handle modules by the housing rather than the wire.

2-year warranty coverage. Every kit is covered for two years, in line with EU consumer law. If a component arrives faulty or fails in normal use, use our Faulty Component Request page and we'll send a replacement.

Contact support

Instructions

Digital manuals and video instructions for this light kit are available on our instructions page.

The guide walks through each component and its function, and shares the practices that get the most out of your build.

If any part is missing or damaged, contact us — we're here to help.

Assembly instructions

Features

Light Kit for LEGO® Star Wars™ R2-D2™ #75379: A Droid That Answers Back

Artoo was never a prop. He interrupts, he argues, he decides things while everyone else is talking, and almost all of it happens through a panel of blinking lights. That panel is the reason this kit exists. Lit, the droid stops being a grey and blue cylinder on a desk and starts looking like he is halfway through an opinion.

Logic Display Panel
Blue and red cycle across the logic indicator at an uneven rhythm. That irregularity is the whole trick: a steady blink reads as electronics, while an off-beat one reads as thinking. It is the closest a static model gets to an expression.
Holographic Projector
A single blue beam sits in the projector housing, held steady rather than pulsed. It suggests a message queued and waiting, which is the state Artoo spends most of the first film in, carrying something nobody has watched yet.
Front Utility Panel
The lower panel picks up a cooler accent along its edge. It keeps the body from going dark below the dome, so the droid holds together as one lit object instead of a bright head sitting on a grey drum.
Free-Turning Dome
The wiring is routed to leave the rotating dome free. You can still turn the head to face a visitor, or away from one, without pulling on anything, which matters on a model whose best feature is that it moves.
Rising Periscope
The periscope keeps its travel and takes a small light at the tip. Raised, it catches the eye from across a room; lowered, it disappears entirely. It is the one moving part most lighting kits quietly give up on.
Leg and Foot Accents
Low accents mark the three legs, including the centre foot that folds out. They anchor the droid visually and stop the light stopping at waist height, which is what makes a lit R2 look like he is standing rather than floating.

Pick Your Version

Select the option that matches your display preferences and lighting needs.

Set it once. Leave it glowing.

For the build that's found its shelf and isn't moving again.

Battery Box – compact 3×AAA unit (batteries not included)
Full LED set, tuned to this model
Custom effects, pre-programmed for this build
Precision spotlights on the details worth staring at
PDF manual and video guide

Flick it on when you walk in. That's the whole ritual.

What makes a good light kit for LEGO® Star Wars R2-D2 #75379?

A set-specific LED light kit for LEGO® Star Wars R2-D2 #75379 should match the exact set number, use sensible cable routes and create a believable hierarchy of light. Compatibility matters more than simply adding the highest LED count.

R2-D2 is a desk model more than a shelf model. It is roughly the size of a table lamp, it gets looked at from a metre away, and that changes what lighting has to do: no floodlight, no colour wash, just the few points a viewer at close range actually reads. The dome panel does most of the work, the projector adds one steady note, and everything else stays quiet. Fitted in an evening, entirely reversible, and the dome still turns. If you are building the pair, the C-3PO 75398 kit finishes the duo, and the full Star Wars range covers the ships they spend the films running between.

About

Bright My Bricks

Transform your finished build into a true display piece with a Bright My Bricks LED light kit. Designed specifically for this LEGO set, our kit delivers precise, warm illumination that highlights every detail. Note: you are purchasing the lighting kit only; the LEGO set itself is sold separately

Instructions

Every kit ships with a printed quick-start card, a full PDF manual and a step-by-step video. Here is the shape of the job before you open the bag.

Step 1: Unpack and check
Build the LEGO® set first — lighting a half-finished model means taking it apart again. Lay every component out against the parts list before you start: a missing piece found now costs five minutes, found mid-install it costs the session.
Step 2: Position your LED lights
Each LED goes in a spot the guide names. Thread the wire between bricks as you go rather than at the end — routing is the one step worth taking slowly, and it is what separates a kit you notice from one you do not.
Step 3: Wire your power system
Seat each cable in its module. Present the connector square and push gently; if it resists, back off and realign rather than forcing it. A forced connector is the one thing that bends a pin.
Step 4: Power up and check
Test everything before you close it up. Confirm each LED lights, then hide any wire that shows. A dead connection found now is trivial; found once the set is sealed, it is not.
Step 5: Perfect your display
Tuck the last of the wire out of sight and put the set where it belongs. Installed as directed, the build looks untouched — until you switch it on.

The last step isn't in this guide. It's the evening you finish, turn the room lights off, and watch something you spent weeks on hold its own glow. That is the moment the kit was built for.

Customer Reviews

FAQs

Do I need any special skills or tools?

No. If you can build the set, you can light it. Everything is plug-and-play — no soldering, no wiring knowledge, no tools beyond your hands. The manual walks each step with photos.

Do I have to take my set apart?

Rarely more than partially. You'll lift a few plates and open a few sections to route wire and seat LEDs. The guide tells you exactly which ones, zone by zone, so you're never guessing.

How is the kit powered?

Two options, both included in the design: a battery module (3×AAA, batteries not supplied) for sets you move around, or USB into any power bank, wall adapter or computer for a display that stays lit.

Will the wires show?

Not once installed as directed. The wire is flat ribbon, thin enough to run under a plate or between studs without breaking clutch. Routing is the one part of installation worth taking slowly — done properly, the set looks untouched.

Is it safe for my bricks?

Yes. The whole system runs at 5V with micro-LEDs that don't heat up, so there's nothing to warp, melt or discolour. Components are tested against international safety standards, and nothing in the kit modifies or marks a brick — the installation is fully reversible.

What if a part is missing or faulty?

Use our Faulty Component Request page and we'll send a replacement. Two-year cover, in line with EU consumer law.