Light Kit for LEGO® NASA Artemis Space Launch System #10341

LED light kit for #10341

59,99 €

~~94,99 €~~ 59,99 €

In stock

Version Classic Remote

Description

Every kit is built around three things we won't compromise on.

Housing that disappears into the build. Our LED casings and modules clip onto standard studs like any other piece — no adhesive, no brackets, nothing that reads as an add-on once the set is back together.

Wiring you route once and forget. Flat ribbon wire, thin enough to sit under a plate or turn a corner without lifting a brick. Connectors are non-polarised, so there's no wrong way round and no squinting at tiny arrows mid-install.

Light tuned to the set, not to a catalogue. Each kit gets its own brightness balance and effects — flicker for a forge, a slow fade for a cockpit — decided set by set rather than applied from a default.

Delivery & Returns

Fast dispatch. Orders placed before 12 PM (CEST / GMT+2) are dispatched the same day*. All other orders are dispatched the next business day.

Tiered shipping rates. Costs are calculated based on your order value. See our shipping page for full details.

Simple returns. Need to make a return? Visit our returns request page to begin.

*Same-day dispatch is not guaranteed during high-volume sale events.

Shipping & returns policy

Warranty & Disclaimers

Product disclaimer. This listing is for a Bright My Bricks™ LED lighting kit. The LEGO® set shown in our photos and videos is sold separately and is not included. Bright My Bricks is an independent brand with no affiliation to, sponsorship from, or endorsement by the LEGO Group. LEGO® is a trademark of the LEGO Group.

Safety notice. Contains small parts and batteries. Not for children under 3, in line with EN 71-1. Adult supervision required for younger builders during installation and use.

Installation guidelines. Present the connector square to the port and push gently until it seats. If it resists, back off and realign rather than forcing it — forcing a misaligned connector is the one thing that can bend a pin. Handle modules by the housing rather than the wire.

2-year warranty coverage. Every kit is covered for two years, in line with EU consumer law. If a component arrives faulty or fails in normal use, use our Faulty Component Request page and we'll send a replacement.

Contact support

Instructions

Digital manuals and video instructions for this light kit are available on our instructions page.

The guide walks through each component and its function, and shares the practices that get the most out of your build.

If any part is missing or damaged, contact us — we're here to help.

Assembly instructions

Light Kit for LEGO® NASA Artemis Space Launch System #10341 — standard build, without the LED light kit — From Display Piece To CenterpieceDrag the slider to see what your set looks like before and after our LED kit.

Light Kit for LEGO® NASA Artemis Space Launch System #10341 — lit with the LED light kit — From Display Piece To CenterpieceDrag the slider to see what your set looks like before and after our LED kit.

Features

Light Kit for LEGO® NASA Artemis Space Launch System #10341: On the Pad

Half of this set is not a rocket. The mobile launch tower beside it is a working structure with lifts, arms and platforms, and photographs of a real pad at night are mostly tower rather than vehicle. So the kit lights both, and treats them differently: hard white on the steelwork, orange at the engines, and one small cool light at the very top where the crew would sit.

Engine Ignition
Flickering orange and yellow fill the core stage and boosters. The movement is fast and uneven here, unlike anywhere else in the catalogue, because ignition is genuinely violent and a steady orange would read as a heater rather than as thrust.
The Launch Tower
Multi-level white light climbs the mobile tower. Real pads are lit as industrial sites rather than monuments, so the tone is hard and functional, which also sets up the contrast with the orange at the base of the rocket.
The Orion Capsule
A single cool light marks the crew vehicle at the very top. It is the smallest and highest source in the build, and it is the only one that stands for people, which is why it is kept separate from everything else on the stack.
The Service Arms
The access arms reaching from tower to rocket carry their own low light. They are the physical link between the two halves of the model, and lighting them stops the structure from reading as two separate objects standing near each other.
The Pad and Trench
Low light gathers around the foot of the stack and the flame trench. It gives the model a ground plane, which a rocket badly needs: unlit at the base, a tall vertical build looks like it is hovering rather than standing.
The Countdown Mode
The ignition effects can be left off, leaving only the tower and capsule lit. That quiet state is the model at T minus several hours, which is how a pad actually looks for most of its working life and how many owners leave it.

Pick Your Version

Select the option that matches your display preferences and lighting needs.

Set it once. Leave it glowing.

For the build that's found its shelf and isn't moving again.

Battery Box – compact 3×AAA unit (batteries not included)
Full LED set, tuned to this model
Custom effects, pre-programmed for this build
Precision spotlights on the details worth staring at
PDF manual and video guide

Flick it on when you walk in. That's the whole ritual.

Which parts of LEGO® NASA Artemis Space Launch System #10341 look best illuminated?

A set-specific LED light kit for LEGO® NASA Artemis Space Launch System #10341 should prioritise the details that identify the model from across the room. Local accents create depth; lighting every surface equally usually flattens the build.

Rocket models are almost always presented mid-launch, which is a strange choice given that a vehicle spends minutes in flight and weeks on the pad. This kit covers both states and treats the waiting one as the default. With the ignition effects switched off, the model is a lit industrial structure at night with a capsule at the top, which is what every photograph taken at Kennedy in the days before a launch actually shows. Switched on, it becomes the eight seconds everybody remembers. Having both in one model is the argument for lighting this set rather than displaying it dark. Fitting is straightforward, with most of the wiring hidden inside the tower structure. The Icons range covers the other large display builds.

About

Bright My Bricks

Transform your finished build into a true display piece with a Bright My Bricks LED light kit. Designed specifically for this LEGO set, our kit delivers precise, warm illumination that highlights every detail. Note: you are purchasing the lighting kit only; the LEGO set itself is sold separately

Instructions

Every kit ships with a printed quick-start card, a full PDF manual and a step-by-step video. Here is the shape of the job before you open the bag.

Step 1: Unpack and check
Build the LEGO® set first — lighting a half-finished model means taking it apart again. Lay every component out against the parts list before you start: a missing piece found now costs five minutes, found mid-install it costs the session.
Step 2: Position your LED lights
Each LED goes in a spot the guide names. Thread the wire between bricks as you go rather than at the end — routing is the one step worth taking slowly, and it is what separates a kit you notice from one you do not.
Step 3: Wire your power system
Seat each cable in its module. Present the connector square and push gently; if it resists, back off and realign rather than forcing it. A forced connector is the one thing that bends a pin.
Step 4: Power up and check
Test everything before you close it up. Confirm each LED lights, then hide any wire that shows. A dead connection found now is trivial; found once the set is sealed, it is not.
Step 5: Perfect your display
Tuck the last of the wire out of sight and put the set where it belongs. Installed as directed, the build looks untouched — until you switch it on.

The last step isn't in this guide. It's the evening you finish, turn the room lights off, and watch something you spent weeks on hold its own glow. That is the moment the kit was built for.

Customer Reviews

FAQs

Do I need any special skills or tools?

No. If you can build the set, you can light it. Everything is plug-and-play — no soldering, no wiring knowledge, no tools beyond your hands. The manual walks each step with photos.

Do I have to take my set apart?

Rarely more than partially. You'll lift a few plates and open a few sections to route wire and seat LEDs. The guide tells you exactly which ones, zone by zone, so you're never guessing.

How is the kit powered?

Two options, both included in the design: a battery module (3×AAA, batteries not supplied) for sets you move around, or USB into any power bank, wall adapter or computer for a display that stays lit.

Will the wires show?

Not once installed as directed. The wire is flat ribbon, thin enough to run under a plate or between studs without breaking clutch. Routing is the one part of installation worth taking slowly — done properly, the set looks untouched.

Is it safe for my bricks?

Yes. The whole system runs at 5V with micro-LEDs that don't heat up, so there's nothing to warp, melt or discolour. Components are tested against international safety standards, and nothing in the kit modifies or marks a brick — the installation is fully reversible.

What if a part is missing or faulty?

Use our Faulty Component Request page and we'll send a replacement. Two-year cover, in line with EU consumer law.